Mousse de résine en polyuréthane liquide pour faire la semelle intérieure
Obtenir le dernier prixType de paiement: | L/C,T/T |
Incoterm: | FOB,CIF |
Quantité de commande minimum: | 1000 Kilogram |
transport: | Ocean,Land,Air |
Hafen: | Shanghai |
Type de paiement: | L/C,T/T |
Incoterm: | FOB,CIF |
Quantité de commande minimum: | 1000 Kilogram |
transport: | Ocean,Land,Air |
Hafen: | Shanghai |
Modèle: XC-9080W,XC-6088
marque: Xuchuan chimique
Lieu D'origine: Chine
Types De: Résine synthétique et plastiques
Characteristic: Low density and high hardness, good appearance, little pinhole, and weak foam line
Appearance: Liquid
Application: shoe sole
Keywords: liquid polyurethane resin,insole material memory foam,insole foam
Isocyanate de polyol pour le milieu de la semelle
Application | shoe sole |
Keywords | liquid polyurethane resin,insole material memory foam,insole foam |
A/B Materials Temperatures(℃) | A/B Materials Temperatures(℃) |
A+C/B Mix ratio (By weight) | 100/100~102 |
Cream Time (s) | 6~8 |
End of Rise Time (s) | 30~40 |
Free Rise Foam Density(g/cm3) | 0.21~0.26 |
Mold Temperature(℃) | 45~55 |
Demold Time(min) | Demold Time(min) |
Molded Density (g/cm3) | 0.35~0.60 |
Characteristic: Low density and high hardness, good appearance, little pinhole, and weak foam line |
|||||||
Application: Outsole, slippers, wedge shoes |
|||||||
Typical properties of PU matrix |
|||||||
Name of products |
Appearance |
Viscosity (mPa·s/40℃) |
Density (g·cm-3/40℃) |
Package(kg) |
/ |
/ |
/ |
A-9080W |
Cream,White,liquid |
1000~1300 |
1.01~1.02 |
18 |
/ |
/ |
/ |
B-6088 |
Yellowish transparent liquid or waxy |
600~800 |
1.08~1.2 |
20 |
/ |
/ |
/ |
Materials preheat |
|||||||
A-9080W: preheated at 50~60℃ for 6~8 hours. |
|||||||
B-6088: preheated at 50~60℃ for 6~8 hours. |
|||||||
Typical processing parameters & Reaction parameter. |
|||||||
Items |
A/B Materials Temperatures(℃) |
A+C/B Mix ratio |
Cream Time (s) |
End of Rise Time (s) |
Free Rise Foam Density(g/cm3) |
Mold Temperature(℃) |
Demold Time(min) |
Parameter |
40~45/38~42 |
100/100~102 |
6~8 |
30~40 |
0.21~0.26 |
45~55 |
5~7 |
The adding content of C-2 should be 210g±10g/18kg. |
|||||||
The adding content of water should be 0~80g/18kg according to the reality. |
|||||||
The adding content of hardener should be 0~1200g/18kg according to the reality. |
|||||||
Physical properties |
|||||||
Items |
Molded Density (g/cm3) |
Hardness |
Tensile strength |
Elongation |
Tear Strength |
Williams abrasion |
/ |
Physical properties |
0.35~0.60 |
60~88 |
4~7 |
200~300 |
11~20 |
130~200 |
/ |
Demold time may be prolonged with the increase of sole thickness. |
|||||||
These physical data are acquired by testing a sample of 6mm thick. |
|||||||
Data listed above are just for reference. The detail data are subjected to practical production. If other requests for physical properties, please contact us. |
Xuchuan Chemical créé en 2007, le capital enregistré des sociétés est de 500 millions de RMB. Les principaux produits sont tous des gammes de polyester polyol, de résine en polyuréthane pour les chaussures, des résines en polyuréthane à base d'eau et sans solvant pour le cuir artificiel, les adhésifs de liaison en polyuréthane et les adhésifs à fonte à chaud en polyuréthane.
Maintenant, Xuchuan a 4 bases de production modernes, la capacité de production a atteint 630 000 tonnes par an, des produits exportés vers 32 pays et régions du monde.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.